7.5Litre 1K Synthetic Bargain Kit

1K Synthetic Paint – Gloss / Satin / Matt (Brush • Roller • Spray)

Our 1K Synthetic Paint is a single-pack, solvent-based synthetic (alkyd) topcoat designed for a hard-wearing finish on general industrial and maintenance work. It’s fast drying, durable, and available as a brushable, rollerable, or sprayable version to suit the job.
We can mix this paint in a wide range of solid colours, including:

• RAL

• British Standard (BS)

• Agricultural colours

• Automotive solid colours

Solid colours only – no metallics.

Surface preparation

For best results, ensure surfaces are clean, dry, sound, and free from oil/grease. Over existing coatings, degrease, abrade (P360–P400), then final clean before painting.

Application & mixing (Brush / Roller / Spray)

Brush / Roller (brushable / rollerable version)

• Apply 2 even coats to achieve the recommended film build.

• Thinning: keep to a minimum; satin guidance is typically 0–5% only if needed for flow.

Spray (sprayable version – gravity feed)

Typical starting guide at 20°C:

• Nozzle: 1.3–1.5 mm

• Air pressure: 2–3 bar

• Thinning: 15–25%

• Coats: typically 2 coats x ~25 microns DFT, with ~10 minutes flash-off at 20°C

Note: Some very dark colours (especially deep blacks) may dry more slowly; if you’re ordering a very dark shade and need faster turnaround, ask us for the best approach.

(AKA – Coach Enamel – Enamel Paint – Truck Coat)