Exterior Wood Paint – Semi-Gloss Quick Dry

Bring life back to your outdoor woodwork with our Exterior Wood Paint, a fast-drying, professional-quality 1K nitro-synthetic coating formulated to provide long-lasting colour and protection.

Designed for exterior timber including garden sheds, doors, fencing, benches, outdoor furniture and garden buildings, it provides a smooth, durable semi-gloss finish with excellent adhesion and good resistance to weathering.

With a semi-gloss finish of approximately 70–80%, the coating gives exterior woodwork an attractive sheen while helping protect the surface from moisture, changing weather conditions and general environmental exposure.

Suitable for brush, roller or spray application, it dries quickly at room temperature and develops its full durability after approximately 15 days.

Key Features

• Fast-drying 1K nitro-synthetic coating – simple single-component application.
• Semi-gloss finish – approximately 70–80% gloss.
• Suitable for exterior timber including sheds, doors, fencing and outdoor furniture.
• Brush, roller or spray application for flexible application depending on the project.
• Fast touch-dry time – approximately 20–30 minutes at 20°C.
• Durable exterior finish designed to provide lasting colour and weather-resistant protection.
• Custom colour mixing available in a wide range of shades.

Suitable Uses

• Garden sheds
• Exterior doors
• Fencing
• Garden benches
• Outdoor furniture
• Garden buildings
• Other suitably prepared exterior wooden surfaces

Surface Preparation

Good preparation is essential for adhesion, appearance and long-term durability. Before painting, make sure the wood is clean, dry and free from grease, wax, dirt and other contamination.

Bare or Weathered Timber

• Sand rough or weathered timber back to a sound, even surface.
• Remove all sanding dust thoroughly before coating.
• Do not apply to wet or damp timber.

Previously Painted Surfaces

• Remove loose, flaking or poorly adhered previous coatings.
• Abrade sound existing finishes to provide a suitable key.
• Remove all sanding residue before applying the new coating.
• Test compatibility first when coating an unfamiliar existing finish.

Mixing & Spray Setup

• Stir the paint thoroughly before use.
• For spray application, thin approximately 70–80% with a suitable thinner.
• Recommended spray nozzle: approximately 1.3–1.5 mm.
• Apply 2 even coats.
• Allow approximately 10 minutes flash-off between coats when spraying.

Application

• Suitable for brush, roller or spray application.
• Apply smooth, controlled coats for an even finish.
• Avoid excessively heavy film build.
• Apply 2 coats for full coverage and improved exterior durability.
• Maintain complete, even coverage across exposed timber surfaces.

Coverage

Approximate coverage is 8–10 m² per litre, depending on the condition and absorbency of the timber, application method and film thickness.

Drying & Curing

At approximately 20°C:

• Touch dry: approximately 20–30 minutes.
• Handling dry: approximately 40–50 minutes.
• Full durability / maximum performance: approximately 15 days.

Drying times can vary depending on temperature, humidity, ventilation, film thickness and application method.

Practical Application Tips

• Do not apply to wet or damp timber.
• Apply thin, even coats rather than one excessively heavy coat.
• Work in clean, dry conditions with good ventilation.
• Protect freshly coated wood from rain and moisture while drying.
• Stir thoroughly before and during application to maintain a consistent finish.
• Always check compatibility before applying over an unfamiliar previous coating.

Equipment Cleaning

• Clean brushes, rollers and spray equipment immediately after use.
• Use a suitable cleaning or synthetic thinner.
• Do not allow the coating to dry inside spray equipment or application tools.
• Dispose of paint, thinner and contaminated waste responsibly and in accordance with local regulations.

Safety & Storage

• Solvent-based 1K coating.
• Wear suitable gloves and eye protection during application.
• Use appropriate respiratory protection when spraying.
• Work in a well-ventilated area.
• Keep away from heat, sparks, naked flames and other ignition sources.
• Keep containers tightly closed when not in use.

Colour Availability

Exterior Wood Paint is available in a wide range of custom-mixed colours, including:

• RAL colours
• BS381C colours
• BS4800 colours
• NCS colours
• Plus many additional custom shades