U-POL Dolphin Glaze Fine Finishing Filler is a premium, technically advanced finishing glaze formulated to eliminate pinholes and surface imperfections before painting. Its self-levelling formulation provides a smooth, ultra-fine finish that requires minimal sanding, ensuring a flawless base for topcoating.
Key Features:
-
Pinhole Resistant: Effectively fills minor imperfections such as pinholes, scratches, and stone chips.
-
Excellent Adhesion: Adheres well to various substrates, ensuring a strong bond.
-
Easy to Sand: Sands effortlessly to a smooth finish.
-
Self-Levelling: Provides a smooth, ultra-fine finish with minimal effort.
-
Semi-Flexible: Accommodates slight movements in the substrate without cracking.
Suitable Substrates:
-
Direct to metal
-
Prepared OEM paint surfaces
-
Aluminium
-
Galvanized steel
-
SMC (Sheet Moulding Compound)
-
Fiberglass
-
Lightly abraded E-coat
-
Most plastics
Application Guide:
-
Surface Preparation: Clean and degrease the surface. Abrade the surface with appropriate grit paper (P80 for bare steel, P180 for original paint, and P180 for GRP). Re-clean and dry the surface.
-
Mixing: Mix thoroughly on an Onion Board Mixing Palette. Follow the mix ratio carefully. Do not under or over-catalyse.
-
Application: Apply with a pressing action to reduce air entrapment.
-
Drying: Allow to flash off for 10–15 minutes between coats. Sandable at 20°C after 15–20 minutes; at 30°C after 15 minutes.
-
Sanding: Dry sand with P180–P240 for a smooth finish.